Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT..., Руководство по эксплуатации

Страница: 51 / 180

Page 49 FT
DX
9000MP O
PERATION
M
ANUAL
DIM
The illumination level of the analog meters, main frequency display, and the LCD display may be reduced, if you are using
the transceiver in a dark environment where high brightness is not desired.
To reduce the illumination level, press the [
DIM
] switch,
located to the left of the leftmost analog meter. To restore
full brightness, press the [
DIM
] switch once more.
You may also customize the amount of brightness reduc-
tion engaged by the pressing of the [
DIM
] switch, and may
use different brightness levels for different front panel
areas. Menu item “
DISPLAY 014 DIMMER-METER ”
adjusts the brightness level of the analog meters and the
LCD display, while menu item “
DISPLAY 015 DIM-
MER-VFD ” sets the brightness levels of the main fre-
quency display (these settings are effective only when the
[
DIM
] switch is pressed).
[DIM] Switch
LCD Display Brightness Adjustment
By following the procedure below, you may adjust
the brightness level of the LCD window.
1. Press the front panel’s [ POWER
] switch for
two seconds to switch the main transceiver
power off.
2. Press and hold in the [ SWR
] key while turning
on the transceiver main power (press and hold
in the [
POWER
] switch for two seconds). Once
power comes on, release
the [
SWR
] key; the LCD
window will now be con-
figured for setting of the
brightness level.
3. Rotate the [
CLAR/VFO-B
] knob to set the
brightness level. You can observe the bright-
ness level changing on the LCD window.
4. When you have finished your adjustment, press
the [ SWR
] switch momentarily to save the new
setting.
VDD TEMP SWR BIAS
BBBBB
ASIC ASIC
ASIC ASIC ASIC
O O O O O
PERA PERA
PERA PERA PERATION
TION
TION TION TION
::::: R R R R R
ECEIVING ECEIVING
ECEIVING ECEIVING ECEIVING
ON ON
ON ON ON
AAAAA
MA MA
MA MA MATEUR
TEUR
TEUR TEUR TEUR
B B B B B
ANDS ANDS
ANDS ANDS ANDS