Yaesu FT-991A, Руководство по эксплуатации, Страница: 92 / 158

Page 90 FT- 991 Operating Manual
CW Convenience Features
Contest Memory Keyer
Text Message Programming
1. Press the MODE button to set the operating mode to
CW.
2. Be sure t hat B reak-in is “Off” with
[
BK-IN
] on the
LCD, if necessary.
3. Touch [ MEM
] on the LCD or press the
FH-2 [ MEM
]
key. A blinking “
REC
” icon will appear in the dis-
play.
4. Touch [ CH1
] - [
CH5
] on the LCD or press an
FH-2
[
1
] - [
5
] key to select the desired CW Memory Reg-
ister into which you wish to program the text. The
text input screen will appear.
5. Touch a key on the LCD to enter the letters, num-
bers, or symbols of the desired label.
6. Repeat step 5 to program the remaining letters, num-
bers, or symbols of the desired text. 12 characters
may be used in the creation of a text.
Use
[


] and [


] on the LCD to set the cursor posi-
tion and [ ] on the LCD to erase a letter at the left
of the cursor.
7. When you have completed the creation of the text,
touch [ ENT
] on the LCD.
Advice:
Use the FH-2 [
t
] and [

] keys to set the cursor posi-
tion and use the
FH-2
’s [
p
] and [
q
] keys to choose
the letter/number to be programmed in each slot of the
memory. In the case of the second example on the previ-
ous page the “ # ” character designates the slot where the
Contest Number will appear.
8. When the message is complete, add the “
}
” character
at the end to signify the termination of the message.
9. Touch [
MEM
] on the LCD or press and hold in the
FH-2 [ MEM
] key for one second to exit, once all
characters (including “
}
”) have been programmed.
Checking the CW Memory Contents
1. Be sure that Break-in is still turned “Off” with
[
BK-
IN
] on the LCD.
2. Touch [
MONI
] on the LCD to enable the CW moni-
tor.
3. Touch [
CH1
] - [
CH5
] on the LCD or press an
FH-2
[
1
] - [
5
] key, whichever memory you just recorded
in. You will hear the results in the sidetone, but no
RF energy will be transmitted.