Yaesu FT-991A, Руководство по эксплуатации

Страница: 102 / 158

Page 100 FT- 991 Operating Manual
DG-ID/DP-ID Features
Recall and use the DG-ID number registered in the DG-ID memory
1. Press the [ MODE ] button, then touch [ C4FM ].
2. Touch and hold [ GM ] on the LCD.
The DG-ID LIST is displayed.
RX TAG TX
0 0 00 03
0 0 00 02
0 0 00 DG- D O1 I 01
TX:
TX:
TX:
TX:
0 0 : RX
: RX
: RX
: RX
00 00
D G - I D L I S T
SELECT
DG- D 2 0 I
DG- D 3 0 I
3. Rotate the MULTI knob to select the DG-ID memory
number “
01
”.
4. Touch [ SELECT ].
A check mark is attached to the selected DG-ID list
number, and the number and tag are shown in green.
0 0 00 03
0 0 00 02
0 5 50 DG- D O1 I 01
TX:
TX:
TX:
TX:
0 0 : RX
: RX
: RX
: RX
00 00
D G - I D L I S T
RX TAG SELECT TX
DG- D 2 0 I
DG- D 3 0 I
5. Touch [
BACK
] to return to normal operation.
This completes the recalling of the DG-ID.
When using the DG-ID memory, the tag of the DG-
ID memory being used is displayed every 3 seconds.
If the DG-ID memory is “
00
”, the DG-ID memory
tag is not displayed.


Note:

Normally, for general operation set the DG-ID
list register number to “
00
”. DG-ID number
“
00
” can not be changed. The transmit and
receive DG-ID number of register “
00
” cannot
be changed.
Use the GM (Group Monitor) with the DG-ID function
1. Touch [ GM ] to turn the GM (Group Monitor)
function ON, in order to find if other Group Member
stations are operating within communications range.
The “
GM
” icon is shown at the upper left of the
display.
: 6 4: ) & +&
* , 3 ,
The other stations must also turn the GM function ON.
The call sign, the distance and the direction of up to
24 stations operating with the GM function ON, set
to the same DG-ID number, and that are within the
communication range, may be tracked.
Rotate the MULTI knob to select the other stations.
2. Touch [ GM ] to turn the GM (Group Monitor)
function OFF.
Note:

If the receive DG-ID number is set to other than
"
00
", note that signals without the same DG-ID
number cannot be heard.