Yaesu FT-991A, Руководство по эксплуатации, Страница: 111 / 158

Page 109 FT- 991 Operating Manual
Memory Operation
Standard Memory Operation
Split Memory
Separate frequencies for transmit and receive can be registered for each memory channel.
1. Set VFO-A up with the frequency, mode, and status
(see “Convenient Memory Functions” on page 97),
the way you want to have it stored.
2. Press the A

M button momentarily; the current
channel number will appear in the display and the
“ MCK ” notation will appear.
A

M Button MULTI Knob
E J
E J
E J
.5$
3. Rotate the MULTI knob to select the memory chan-
nel that you wish to store the data on.
4. Press and hold in the A

M button for one second
to store the receive frequency and other data into the
selected memory channel. A double beep will con-
firm that the A

M button was held in long enough
and the data is registered.
5. Enter the transmit frequency, mode, and status (see
“Convenient Memory Functions” on page 97), the
way you want to have it stored.
6. Press the A

M button. Make sure that the memory
channel storing the receive frequency is selected.
E J
E J
E J (/
.5$
7. To register the transmit frequency, press and hold the
PTT button on the microphone, and simultaneously
press and hold the A

M button. A double beep
will confirm that the A

M button was held in long
enough and the data is registered. When the memory
writing is completed, the receive frequency will be
shown in the display.
Advice:
When a split-frequency memory channel is recalled,
“ DUP ” is displayed on the LCD.
Displays DUP