Yaesu FT-991A, Руководство по эксплуатации

Страница: 131 / 158

Page 129 FT- 991 Operating Manual
Menu Mode
012 KEYER TYPE
Function: Switches the keyer operation.
Available Values: OFF/BUG/ELEKEY-A/ELEKEY-B/
ELEKEY-Y/ACS
Default Setting: ELEKEY-B
Description: Switches the keyer operation.
OFF:
Disables the keyer function.
BUG:
Functions as a “BUG key”. Only the “Dot” side
is automatically generated (the “Dash” side is
generated manually).
ELEKEY-A:
A code element (“Dot” or “Dash” side) is trans-
mitted upon pressing both sides of the paddle.
ELEKEY-B:
Pressing both sides of the paddle transmits the
currently generated “Dash” side followed by
“Dot” side (or reverse order).
ELEKEY-Y:
Pressing both sides of the paddle transmits the
currently generated “Dash” side followed by
“Dot” side (or reverse order).
While transmitting the “Dash” side, the first
transmitted “Dot” side will not be stored.
ACS:
Functions as the “Keyer with automatic spac-
ing control feature” which sets spacing between
characters precisely to be the same length as a
dash (three dots in length).
013 KEYER DOT/DASH
Function: Reverses the connections of the CW paddle
front panel key jack
Available Values: NOR/REV
Default Setting: NOR
Description: Reverses the connections of the CW paddle.
NOR: Press the right side of the paddle to transmit
the “Dot” signal and press the left side of
the paddle to transmit the “Dash” signal.
REV: Press the left side of the paddle to transmit
the “Dash” signal and press the right side of
the paddle to transmit the “Dot” signal.
014 CW WEIGHT
Function: Adjusts the keyer CW weight.
Available Values: 2.5 - 4.5
Default Setting: 3.0
Description: Sets the “Dot”:“Dash” ratio for the built-in
electronic keyer.
015 BEACON INTERVAL
Function: Sets the interval time between repeats of the
beacon message.
Available Values: OFF/1 - 240sec (1sec/step)/270 -
690sec (30sec/step)
Default Setting: OFF
Description: Sets the interval time between repeats of
the beacon message.
A message (message memory/text memory)
registered in the contest memory keyer,
may be transmitted as a CW Beacon mes-
sage.
If you do not want the message to repeat in
a beacon mode, set this item to “
OFF
”.
016 NUMBER STYLE
Function: Selects the contest number “Cut” format for
an imbedded contest number.
Available Values: 1290/AUNO/AUNT/A2NO/A2NT/
12NO/12NT
Default Setting: 1290
Description: Abbreviates numbers “One”, “Two”, “Nine”
and “Zero” using Morse code when sending
the contest number.
1290: Does not abbreviate the contest number.
AUNO: Abbreviates to “A” for “One”, “U” for
“Two”, “N” for “Nine”, and “O” for
“Zero”.
AUNT: Abbreviates to “A” for “One”, “U” for
“Two”, “N” for “Nine”, and “T” for
“Zero”.
A2NO: Abbreviates to “A” for “One”, “N” for
“Nine”, and “O” for “Zero”. Does not ab-
breviate number “Two”.
A2NT: Abbreviates to “A” for “One”, “N” for
“Nine”, and “T” for “Zero”. Does not ab-
breviate number “Two”.
12NO: Abbreviates to “N” for “Nine”, and “O”
for “Zero”. Does not abbreviate numbers
“One” and “Two”.
12NT: Abbreviates to “N” for “Nine”, and “T”
for “Zero”. Does not abbreviate numbers
“One” and “Two”.
017 CONTEST NUMBER
Function: Enters the contest number using Morse code.
Available Values: 0 - 9999
Default Setting: 1
Description: Enters the contest number using Morse
code (page 86).