92
Menu Mode
FT-891 Advance Manual
12-02 CONTOUR LEVEL
Function:
Adjusts the GAIN of the CONTOUR circuit.
Available Values:
-40 - 0 - 20
Default:
-15
Description:
Sets level of the attenuation or the gain of the CONTOUR circuit.
12-03 CONTOUR WIDTH
Function:
Sets the bandwidth (“Q”) of the CONTOUR circuit.
Available Values:
1 - 11
Default:
10
Description:
Sets the bandwidth (WIDTH) of the CONTOUR circuit.
12-04 IF NOTCH WIDTH
Function:
Sets the attenuation bandwidth characteristic of the DSP IF notch filter on the
VFO-A.
Available Values:
NARROW/WIDE
Default:
WIDE
Description:
Selects the attenuation bandwidth characteristic setting of the DSP IF
notch filter to “NARROW” or “WIDE”.
13-01 SCP START CYCLE
Function:
Selects the sweep interval of the Spectrum Scope feature.
Available Values:
OFF/3/5/10 (sec)
Default:
OFF
Description:
The scope spectrum is repeatedly swept according the set interval.
13-02 SCP SPAN FREQ
Function:
Sets the bandwidth of the spectrum scope sweeping.
Available Values:
37.5/75/150/375/750 (kHz)
Default:
750kHz
Description:
Sets the bandwidth (SPAN) of the spectrum scope.
14-01 QUICK DIAL
Function:
Setting of the MULTI function knob tuning speed in the SSB, CW, RTTY and
DATA mode.
Available Values:
50/100/500 (kHz)
Default:
500kHz
14-02 SSB DIAL STEP
Function:
Setting of the
DIAL
knob tuning speed in the SSB mode.
Available Values:
2/5/10 (Hz)
Default:
10Hz
