18
CW Mode Operation
FT-891 Advance Manual
Text Message Programming from the FT-891 Control Panel
1. Set the operating mode to CW.
2. Press the [
F
] key repeatedly, to find the
“REC SETTING” list screen.
NOTE:
This screen may be enabled/
disabled via Menu Mode “
05-11
[
REC SETTING
]”.
3. Rotate the
MULTI
function knob to select
“MEM”.
4. Press the
MULTI
function knob. A blinking
“REC” icon will appear in the display.
5. Rotate the
MULTI
function knob to select
any channel [
CH1
] through [
CH5
].
6. Press the
MULTI
function knob. The “CW
TEXT” screen will appear.
7. Press the [
B
](
EDT
) key. The text input
screen will appear.
8. Rotate the
MULTI
function knob to select the letters, numbers, or symbols of the de-
sired label, then press the
MULTI
function knob.
9. Press the
MULTI
function knob.
10. Repeat step 8 and 9 to program the remaining letters, numbers, or symbols of the
desired text. Up to 50 characters may be stored in each of the five memories.
r
Rotate the
MULTI
function knob to set the cursor position and press the [
B
](
CE
)
key to erase and input characters.
11. When text entry is complete, press the [
C
](
ENT
) key.
12. Press the [
A
](
BCK
) key to exit the text input screen.
13. Press and hold the [
F
] key for one second to exit the “REC SETTING” list screen and
resume normal operation.
