20
CW Mode Operation
FT-891 Advance Manual
Checking the CW Memory Contents from the FT-891 Front Control Panel
1. Set the operating mode to CW.
2. Set the “BK-IN” feature to “OFF”.
3. Press the [
F
] key repeatedly, to find the
“FUNCTION-1” list screen.
4. Rotate the
MULTI
function knob to select
“MON”.
5. Press the
MULTI
function knob, the Monitor
level pop-up screen will appear.
6. Rotate the
MULTI
function knob to set the
Monitor volume level (0 - 100).
7. Press the
MULTI
function knob or the [
F
]
key.
8. Press the [
F
] key repeatedly, to find the
“REC SETTING” list screen.
NOTE:
This screen may be enabled/
disabled via Menu Mode “
05-11
[
REC SETTING
]”.
9. Rotate the
MULTI
function knob to select a memory [
CH1
] - [
CH5
] that was previously
recorded.
10. Press the
MULTI
function knob to hear the CW message played in the sidetone mon-
itor. No RF energy will be transmitted.
11. Press and hold the [
F
] key for one second to exit the “REC SETTING” list screen and
resume normal operation.
