background image

60

Miscellaneous Setting

FT-891 Advance Manual

Meter Peak Hold

Sets the time duration the maximum value reading is shown on the meter (peak hold).
1.  Press and hold in the [

F

] key for one second 

to activate the Menu mode.

2.  Rotate the 

MULTI

 function knob to select 

Menu Mode “

02-05

 [

PEAK HOLD

]”.

3.  Press the 

MULTI

 function knob, and then 

rotate it to select the meter peak hold time 

(OFF/0.5/1.0/2.0 seconds).

Default:

 OFF

4.  Press the 

MULTI

 function knob to save the 

new setting.

5.  Press the [

F

] key to exit the Menu mode and resume normal operation.

POP-UP Menu

Set the position (Lower or Upper) of the pop-up window on the display screen.
1.  Press and hold in the [

F

] key for one second 

to activate the Menu mode.

2.  Rotate the 

MULTI

 function knob to select 

Menu Mode “

02-07

 [

POP-UP MENU

]”.

3.  Press the 

MULTI

 function knob, and then 

rotate it to set the display position (Lower or 
Upper) of the pop-up window.

4.  Press the 

MULTI

 function knob to save the 

new setting.

5.  Press the [

F

] key to exit the Menu mode and 

resume normal operation.

Содержание FT-891



















































































































Отзывы: