Yaesu FT-2000D, Руководство по эксплуатации

Страница: 83 / 140

Page 81 FT-2000D O
PERATING
M
ANUAL
T
RANSMITTER
C
ONVENIENCE
F
EATURES
S
PLIT
-F
REQUENCY
O
PERATION
1. Start with regular transceiver op-
eration on the Main (VFO-A) band.
MAIN (VFO-A)
[
RX
] switch “ON”
(LED glows Green)
[
TX
] switch “ON”
(LED glows Red)
SUB (VFO-B)
[
RX
] switch “OFF” (LED Off)
[
TX
] switch “OFF” (LED Off)
2. Press and hold in the [ SPLIT
] button for two sec-
onds to engage the Quick Split feature, and apply a
frequency 5 kHz above the Main (VFO-A) fre-
quency to the Sub (VFO-B) frequency register.
The VFO configuration will then be:
MAIN (VFO-A)
[
RX
] switch “ON” (LED glows Green)
[
TX
] switch “OFF” (LED Off)
SUB (VFO-B)
[
RX
] switch “OFF” (LED Off)
[
TX
] switch “ON” (LED glows Red)
3. Press and hold in the [ SPLIT
] button for two sec-
onds to increment the Main (VFO-A) frequency
a5 kHz.
Q
UICK
P
OINTS
:
ˆ The operating mode applied to the Sub (VFO-B)
register will be the same as that in use on the Main
(VFO-A) register.
ˆ The offset of the Sub (VFO-B) from the Main VFO
(VFO-A) is programmed via the Menu, and is set
to +5 kHz at the factory. Other offsets may be se-
lected, however, using the following procedure:
1. Press the [ MENU
] button to enter the Menu mode.
2. Rotate the Main Tuning Dial knob to select Menu
item “ 033 GEnE Q SPLIT .”
3. Rotate the [
SUB VFO-B
] knob to select the de-
sired offset.
The available selections are
–20kHz –20kHz
–20kHz –20kHz
–20kHz
~
+20kHz +20kHz
+20kHz +20kHz
+20kHz
(factory default:
+5 kHz +5 kHz +5 kHz +5 kHz +5 kHz
).
4. When you have completed all adjustments, press
and hold in the [ MENU
] button for two seconds to
save the new setting and exit to normal operation.
If you only press the [
MENU
] button momentarily
to exit, any changes you performed will not be
stored.
[SPLIT] Button
MAIN [TX] Switch
Sub [RX] Switch
MAIN [RX] Switch
Sub [TX] Switch
Main Tuning Dial Knob [SUB VFO-B] Knob
[MENU] Button
Quick Split Operation
The Quick Split feature allows you to set a one-touch offset of +5 kHz to be applied to your radio’s transmit
frequency on the Sub (VFO-B), compared to the Main (VFO-A) frequency.
WXWXWXWXWXWXWXWXWXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYXWZYX