Yaesu FT-2000D, Руководство по эксплуатации

Страница: 48 / 140

Page 46 FT-2000D O
PERATING
M
ANUAL
“MY B
ANDS
” O
PERATION
When operating on an Amateur Band, it is possible to use the [ BAND
] buttons to engage the use of the [
SUB VFO-B
] knob
for Amateur band selection. The “My Bands” feature allows you to select several Amateur bands, and make only those
bands available for selection via the [ SUB VFO-B
] knob.
This feature can be very useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have antennas for
some bands.
“My Bands” Setup
1. Press the [ MENU
] button to engage the Menu mode.
2. Rotate the Main Tuning Dial knob to select Menu item
“ 124 tun MY BAND .”
3. Rotate the [ SUB VFO-B
] knob to choose a band that
you wish to skip (omit) from the band-selection loop
(when using the [ SUB VFO-B
] knob for band selec-
tion). The available choices are 1.8/3.5/5/7/10/14/18/
21/24/28/50/GE (General Band)/AU (Transverter).
4. Press the [
ENT
] button to set the omission command
to ON. The “
E EE EE
” (Enable) notation at the right of the
band notation will change to “
d dd
dd
” (disable).
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
N
OTE
:::::
The “ON” command sets the selected band to be
skipped , while the “OFF” command sets the selected
band to be included in the band-selection list. Return
the “
d dd dd
” notation to “
E EE EE
” to restore operation on a previ-
ously-deleted band.
6. Press and hold in the [ MENU
] button for two seconds
to lock in the new configuration and exit to normal
operation.
C
ONVENIENCE
F
EATURES
Main Tuning Dial knob
[SUB VFO-B] Knob
[MENU] Button
[ENT] Button
[SUB VFO-B] Knob
(VFO-A)[BAND] Button
[A/B] Button
(VFO-B)[BAND] Button
14 MHz
14 MHz
18 MHz
50 MHz
21 MHz 21 MHz
7 MHz
7 MHz
5 MHz
1.8 MHz
28 MHz
28 MHz
24 MHz
3.5 MHz
3.5 MHz
10 MHz
14 MHz
21 MHz 7 MHz
28 MHz 3.5 MHz
A
DVICE
:
The “My Band” feature affects both the Main (VFO-A)
and Sub (VFO-B) bands.
“My Band” Operation
1. Press the (VFO-A) [ BAND
] button; the imbedded LED
will glow Red, if you operate the “My Band” feature
on the Main band (VFO-A).
A
DVICE
:
If the “My Band” feature on the Main band (VFO-A)
seems not to be operating, check see if the orange lamp
to the right of the [
SUB VFO-B
] knob is illuminated.
If so, pressing the [ A/B
] key will cause the orange lamp
to the right of the [
SUB VFO-B
] knob to go out. Now,
press the (VFO-A) [ BAND
] button to begin “My Band”
feature.
2. Press the (VFO-B) [
BAND
] button; the imbedded LED
will glow Orange, if you operate the “My Band” fea-
ture on the Sub band (VFO-B).
3. Rotate the [
SUB VFO-B
] knob to choose the Ama-
teur band on which you wish to operate. Only those
Amateur bands that have not been skipped will appear
as you scroll through the bands.