Xyratex RS-1600-FC-SBD, Инструкция по установке и эксплуатации

Страница: 29 / 82

Introduction
15
1.5.7 Environment
1.5.8 Interfaces
Table 1–2 Ambient Temperature and Humidity
Temperature Range Relative Humidity Max. Wet Bulb
Operational 5°C to 40°C 20% to 80%
non-condensing
23°C
Non-Operational 0°C to +50°C 8% to 80%
non-condensing
27°C
Storage 1°C to +60°C 8% to 80%
non-condensing
29°C
Shipping -40°C to +60°C 5% to 100%
non-precipitating
29°C
Airflow System must be operated with low pressure rear exhaust installation
(Back pressure created by rack doors and obstacles not to exceed 5
pascals [0.5mm Water gauge])
Altitude, Operational 0 to 2133 m (0 to 7,000ft)
Altitude, Non-Operational -305 to 12,192m (-1000 to 40,000ft)
Shock, Operational Vertical axis 5g peak 1/2 sine, 10ms
Shock, Non-Operational 30g 10ms 1/2 sine
Vibration, Operational 0.21grms 5-500 Hz Random
Vibration, Non-Operational 1.04grms 2-200 Hz Random
Vibration, Relocation 0.3g 2-200 Hz sine
Acoustics Sound Pressure Operating - Less than 58 dB LpA average
measured at the bystander positions.
(The 4 bystander positions are 1m horizontal and 1.5m off the floor
positioned front, back, left and right. The unit under test will be
measured on the floor)
Measured at 20°C
Orientation & Mounting 19" Rack mount (3EIA Units)
• Rack Rails To fit 800mm depth Racks compliant with IEC 297
• Rack Characteristics Back pressure not exceeding 5 pascals (0.5mm water gauge)
Safety & Approvals CE, UL, cUL
• EMC EN55022 (CISPR - A), FCC A
Drive support See drive carrier specification
Attachment • 1 FCAL loop of 16 drives per SBD module
• Passive Backplane with 1 or 2 Loop Resiliency Circuit (SBD) Module.
• Host/Expansion Ports: FC-AL
– 4 x SFP optical per SBD module