manualshive.com logo in svg

Xyratex RS-1600-FC-SBD, Инструкция по установке и эксплуатации

Поделиться
Скачать
Xyratex RS-1600-FC-SBD Скачать руководство пользователя страница 26

RS-1600/1602-FC-SBD  User Guide

12

1.3.5 Dummy Carrier Modules

Dummy carrier modules are provided for fitting in all unused drive bays. They are designed as integral 

drive module front caps with handles and must be fitted to all unused drive bays to maintain a balanced 
airflow.

1.3.6 Blank Modules 

Warning

Operation of the Enclosure with ANY modules missing will disrupt the airflow and the drives will 
not receive sufficient cooling. It is ESSENTIAL that all apertures are filled before operating the 
unit. Dummy Carriers and/or Blank modules are available for this purpose.

1.4 Visible and Audible Alarms 

The functional modules have associated status LEDs. The Ops Panel shows a consolidated status for all 
modules.

LEDs show constant green for good or positive indication. Constant Amber LEDs indicate there is a fault 
present within that module.

The Ops Panel also incorporates an Audible Alarm to indicate when a fault state is present and also an 

Alarm Mute push-button. 

Warning

The Ops Panel is an integral part of the enclosure chassis assembly and can only be replaced by 
trained personnel.

Figure 1–13

Anti-tamper Lock

Содержание RS-1600-FC-SBD



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды