Entering Chassis Management Commands
CHASSIS CONSOLE SLOT
Connect to another processor module in the chassis
The CHASSIS CONSOLE SLOT command establishes a connection to the
Xyplex command interface on any Network 9000 Type 2 processor module
in the chassis through the local management bus (LMB).
Notes
The console port in the target slot cannot have an active session. The
console LED on the processor module remains lit whenever a session is
active on the console port.
You cannot use the CHASSIS CONSOLE SLOT command to connect to
Network 9000 Type 1 cards. Use the TELNET CONSOLE or REMOTE
CONSOLE commands to do this. These commands are described in
Chapter 2 of this manual and the Commands Reference Manual for each
product.
Privilege
Level
Privileged
Syntax
CHASSIS CONSOLE SLOT slot-num
Where
Means
slot-num
The number of the slot holding the processor module where you want to make a
connection . Valid slot numbers are 1-15. You can specify only one slot number in
this command line.
Example
A user enters the CHASSIS CONSOLE command to establish a connection
to the Xyplex command interface of a processor module in slot 4.
Xyplex>> chassis console slot 4
#
The
#
character is the password prompt. The default password is
access
.
Enter a password and press the Return key. The password does not appear
on the screen. When you enter the correct password, the
Enter
Username>
prompt appears.
Enter username> Chris
0020
31
