Managing Initialization Parameters
Internet Load Host:
DEFINE CHASSIS SLOT [list ] LOAD [record|ALL] INTERNET [LOAD] HOST internet-
address
Internet Load Gateway:
DEFINE CHASSIS SLOT [list ] LOAD [record|ALL] INTERNET [LOAD] GATEWAY
internet-address
Internet Load File:
DEFINE CHASSIS SLOT [list ] LOAD [record] INTERNET [LOAD] FILE
" /pathname/ filename"
The following sections describe variable in these commands and give examples
Internet Load Address
The Internet load address specifies the Internet address for the processor module in the
chassis. The Internet load host on the network uses this address during DTFTP loading.
Figure 4-1 shows 0.0.0.0 in this field, because that is the default. The following is an
example of the command which specifies an Internet address in the primary initialization
record of the terminal server in slot 2:
Xyplex>> define chassis slot 2 load primary internet address
140.180.118.2
Internet Load Host
The Internet load host specifies the Internet address of the host on the network where the
software load image file resides. Figure 4-1 shows 0.0.0.0 in this field, because that is the
default. The following is an example of the command which specifies an Internet address
for an Internet load host in the primary initialization record of the terminal server in slot
2:
Xyplex>> define chassis slot 2 load primary internet host
140.179.119.3
Internet Load Gateway
The Internet load gateway specifies the Internet address of a gateway on the network which
the processor module uses to gain access to the Internet load host. Not all network
configurations include a gateway, so you may not need to specify this address, even if the
module uses DTFTP to obtain the software load image. Figure 4-1 shows 0.0.0.0 in this
field, because this is the default. The following is an example of a command which
specifies the address of an Internet load gateway in the primary initialization record of the
terminal server in slot 2:
Xyplex>> define chassis slot 2 load primary internet gateway
140.179.111.5
58
0020
