Xylem YSI 182-XT-4, Руководство по эксплуатации

Страница: 85 / 144

System 182-XT-4 The SETTINGS menu
5 - 3 ba76027e02 12/2014
Inactive sensor datasets An inactive dataset for an IQ sensor arises if the DIQ/S 182-XT-4-PR
receives no signals from an IQ sensor that is already registered. The
Error display appears on the measured value display instead of a
measured value.
An inactive dataset can be reactivated by assigning it to, for example,
an IQ sensor of the same type (see section 8.3.2). All settings are
retained. If these data are no longer required, they can be erased. All
the settings belonging to this IQ sensor as well as any links with outputs
are deleted by this action.
Procedure: Deleting
inactive datasets
5.4 Relay output R1/R2/R3
In these menus you can link sensors with the relay outputs of the
Universal Transmitter and adjust the outputs. The various setting
To accept all settings, highlight the Save and quit menu
item at the lower end of the setting table and press
g
. If
you exit the setting table via
m
,
e
/Quit or the Quit menu
item, all changes are ignored.
1 Open the SETTINGS menu with
s
.
2 Using
w
and
g
select and confirm the S0x Sensor menu
item (corresponding to the sensor number).
If the dataset is inactive, the following display appears:
3 Select Delete dataset with
d
and confirm with
g
.
The dialog window for the security prompt appears.
4 Select Delete dataset with
d
and confirm with
g
.
The inactive sensor is erased.