Chapter 3 – BIOS Setup Menus
3-20
VMEbus BERR ANMI
Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a VMEbus error. The default is “Disabled.”
VMEbus IRQ1-IRQ7
Determines which of the VMEbus auxiliary maskable interrupt (AMI) levels
(1-7) can be received by the XVME-655. Each interrupt level can be
enabled or disabled individually. All are disabled by default.
Exit Menu
This menu prompts you to exit setup.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Advanced
Security
VMEbus
Exit
Item Specific Help
Save Changes & Exit
Exit without Saving Changes
If the item you are viewing
Get Default Values
has specific help, it will
Load Previous Values
be listed here.
Save Changes
F1
Help
¯
Select Item
-/+
Change Values
F9
Setup Defaults
ESC
Exit
¨
Select Menu
Enter
Select
}
Sub-Menu
F10 Previous Values
Figure Chapter 3 -16. Exit Menu
Option
Description
Save Changes & Exit
Saves in battery-backed CMOS the selections displayed in the menus.
After you save your selections, the program displays this message:
“Values have been saved.”
“[Continue]”
If you attempt to exit without saving, the program asks if you want to
save before exiting. The next time you boot your computer, the BIOS
configures your system according to the setup selections stored in
CMOS. If those values cause the system boot to fail, reboot and press
F
2 to enter the BIOS setup menus. In these menus, you can set the
default values (as described below) or change the selections that
caused the boot to fail.
Exit Without Saving Changes
Exit the BIOS setup menus without storing any changes you may have
made. The selections previously in effect remain in effect.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
