Chapter 5 – XVME-978 PCI Ethernet Controller Module
5-3
5.
While still tilting the right side of the XVME-978 up, align the keying pins on the
80-pin interboard connector closest to the XVME-655 front panel.
6.
Once the keying pins are aligned, lower the right side of the XVME-978 onto the 80-
pin connectors on the XVME-655. Apply gentle pressure until the XVME-978 is
properly seated onto the XVME-655.
7.
Once the XVME-978 is properly seated, affix the front panel filler plate provided
with the XVME-978 by snapping it into the opening. Make sure the holes for the
Ethernet connectors line up.
8.
Secure the XVME-978 to the XVME-655 using the screws and standoffs.
Caution
Do not use excessive force or pressure to engage the connectors. If the
boards do not properly connect, remove the module and inspect all
connectors for possible damage or obstructions.
9.
Install the XVME-655. Refer to the instructions in Chapter 2.
Pinouts
The XVME-978 connects to two 80-pin interboard connectors.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com