Xycom XVME-655, Руководство пользователя

Страница: 45 / 91

Chapter 3 – BIOS Setup Menus
3-19
Option Description
Slave Memory Size Determines the amount of dual-access memory that is available to external
VMEbus maters when the Slave Address Space option is set to “Extended.” If
the Slave Address Space option is set to “Standard,” the slave memory size is
fixed at 4 Mbytes. The slave memory size cannot be more than the total memory
size. The default is 4 Mbytes.
Slave Address Sets the VMEbus address of the XVME-655 dual-access RAM. When the Slave
Address Space option is set to VMEbus Standard (A24), the dual-access
memory must be located on a 4-Mbyte boundary and the upper two hexadecimal
digits of the slave address are ignored. When the Slave Address Space option is
set to VMEbus Extended (A32), the slave address must be a multiple of the
slave memory size. The default is “AA4.”
Interrupt Signals Submenu
Use this submenu configure the processor board’s VMEbus interrupt signals.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
VMEbus
Interrupt Signals Item Specific Help
VMEbus ACFAIL ANMI: [Disabled] If the line item you are
VMEbus SYSFAIL ANMI: [Disabled] viewing has specific help,
VMEbus BERR ANMI: [Disabled] it will be listed here.
VMEbus IRQ1: [Disabled]
VMEbus IRQ2: [Disabled]
VMEbus IRQ3: [Disabled]
VMEbus IRQ4: [Disabled]
VMEbus IRQ5: [Disabled]
VMEbus IRQ6: [Disabled]
VMEbus IRQ7: [Disabled]
F1 Help
­¯
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
¬ ®
Select Menu Enter Select
}
Sub-Menu F10 Previous Values
Figure Chapter 3 -17. Interrupt Signals Menu
Option Description
VMEbus ACFAIL ANMI Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a power failure. The default is “Disabled.”
VMEbus SYSFAIL ANMI Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a system failure. The default is “Disabled.”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com