Chapter 3 – BIOS Setup Menus
3-21
Option
Description
Get Default Values
Sets all fields in the BIOS setup menus to their default values. The
program displays this message:
“Default values have been loaded.”
“[Continue]”
During boot up, if the BIOS program detects a problem in the integrity
of values stored in CMOS, it displays these messages:
“System CMOS checksum bad - run SETUP”
“Press <F1> to resume, <F2> to Setup”
This means the CMOS values have been corrupted or modified
incorrectly, perhaps by an application program that changes data
stored in CMOS. Press
F
1 to resume the boot (this causes the system
to be configured using the default values) or
F
2 to run Setup with the
ROM default values already loaded into the menus. You can make
other changes before saving the values to CMOS.
Load Previous Values
Restores the values you previously saved to CMOS if you change your
mind about changes you have made and have not yet saved. The
following message will then display:
“Previous values have been loaded.”
“[Continue]”
Save Changes
Saves all your changes without exiting the BIOS setup menus. You can
return to the other menus if you want to review and change your
selections.
BIOS Compatibility
This BIOS is IBM PC/AT compatible with additional CMOS RAM and BIOS data areas
used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com