Chapter 5 – XVME-978 PCI Ethernet Controller Module
5-2
Figure Chapter 5 -2. XVME-978 Installation
The following steps illustrate how to install the XVME-978 on the XVME-655 board. As
you are reading the directions, reference Figure Chapter 5 -2.
Warning
Never install or remove any boards before turning off the power to the
bus and all related external power supplies.
1.
Disconnect the AC power going to the VMEbus chassis.
2.
If the XVME-655 has been inserted in the backplane, remove it before mounting the
XVME-978.
3.
Remove the XVME-655 front panel filler plate.
4.
Position the XVME-978 Ethernet connectors so they fit through the opening on the
XVME-655 front panel. This can be accomplished by tilting the right side (the side
closest to the VMEbus connector) of the XVME-978 up until the Ethernet
connectors fit into the opening.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com