Xycom XVME 200, Руководство пользователя

Страница: 17 / 57

XVME-200/290 Manual
December, 1987
2.4 XVME-200/290 DIO MODULE JUMPER LIST
Table 2-1. DIO Module Jumper List
Jumper Use
Jl and J3 Determine the direction of handshake line H2 for both of the
PI/T chips (refer to Section 2.4.5 of this manual).
J2 Determines whether the module will respond to supervisory or
non-privileged short I/O VMEbus cycles (refer to Section 2.4.2
of this manual).
JAl0-JAI5 Select module base address on any one of the 64 1K boundaries
within the short I/O address space (refer to Section 2.4.1 of
this manual).
JA1-JA3 Select the VMEbus interrupt level for the module (refer to
Section 2.4.3 of this manual).
2.4.1
Base Address Jumpers
The DIO Module can be configured to be addressed at any one of the 64 IK
boundaries within the VME Short I/O Address space by using jumpers JAI0 through
JA15 (see Figure 2-1 (XVME-200), or Figure 2-2 (XVME-290) for the location of the
jumpers on the board) as shown below:
Table 2-2. Base Address Jumper Options
JA15 JA14
JA13 JA12 JAI1 JAI0
Base Address of
Module
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
I N
IN
OUT
OUT
OUT
OUT
OUT
I N
I N
I N
I N
OUT
OUT
OUT
OUT
I N
I N
I N
I N
OUT
I N
I N
OUT
OUT
I N
I N
OUT
OUT
I N
I N
OUT
OUT
I N
I N
OUT
I N
OUT
I N
OUT
I N
OUT
I N
OUT
I N
OUT
I N
OOOOH
0400H
0800H
OCOOH
1OOOH
1 4 0 0 H
1 8 0 0 H
1 C O O H
2000H
2400H
2800H
2 C O O H
3000H
2-5