Xycom XVME 200, Руководство пользователя

Страница: 24 / 57

XVME-200/290 Manual
December, 1987
2.5.2 Pl and P2 Connectors
Connectors PI and P2 are mounted at the rear edge of the board (see Figure
2-1).
The pin connections for
Pl
( a 96-pin, 3-row connector) contains the standard
address, data, and control signals necessary for the operation of VMEbus-defined
NEXP modules. (The signal definitions and pin-outs for the connector are found in
Appendix A of this manual.) The Pl connector is designed to mechanically interface
with a VMEbus defined Pl backplane.
2.5.3 P2 Connector XVME-290/l
The P2 connector is a standard VMEbus P2 backplane connector with 96-pins (3
rows).
(The pin-outs for the connector P2 are found in Appendix A of this
manual.)
The P2 connector is designed to interface with a VMEbus defined P2
backplane.
The P2 connector has been modified slightly for the XVME-290/l (see
Table 2-7).
2-12