3. INSPECTION & ADJUSTMENT
3-18
Inspection of Lubrication System
Check Engine Oil Level
●
Keep the engine in a plan position.
●
Remove the fixture A, fixture B, then remove the left
side cover 1.
●
Remove oil dip rod 2
●
Clean oil dip rod, insert oil dip rod but do not tighten it.
●
Take out oil dip rod and check if oil is between upper
and lower limit.
●
If the engine oil is insufficient, fill more oil until the
sufficient oil is obtained.
Engine Oil: SAE10W/40 classification SF or SG
Replacing Engine Oil
●
Remove left side cover 1, oil dip rod 2, drain bolt 3
and washer 4.
●
Drain out the engine oil while the engine is still
warm.
●
Clean oil dip rod, drain bolt and washer with solvent.
●
Install washer and drain bolt.
Drain Bolt: 30 N.m
●
Fill engine oil. ( about 1900ml)
●
Install oil dip rod, start the engine and allow it to run
for several minutes at idling speed.
●
Turn off the engine and wait for about 3 minutes,
and then check the oil level on the dipstick.
Replace engine oil and oil filter initially at 20
hours or 200km and every 80 hours or 2000km
thereafter.
Note:
●
Keep the engine in a plan position
●
Do not tighten oil dip rod when measuring oil
level
Содержание XY500UTV
