XY Powersports XY500UTV, Руководство по обслуживанию

Страница: 160 / 259

7. CARBURETOR
、
FUEL SYSTEM, AIR INTAKE SYSTEM
7-6
● If float height is not within the specification, check
the valve seat and needle valve;
● If either of valve seat or needle valve is worn,
replace both;
● If both are fine, adjust float height by bending the
float tang ① on the float;
● Measure float height again till it’s within the
specification
Fuel Level
● Place carburetor on a level surface. Connect fuel
level gauge
①
with drain pipe
②
;
Tool: Fuel Level Gauge
● Loosen drain screw
③
● Keep fuel level gauge vertical next to the float
chamber line and read the fuel level “a”
Fuel Level: 3.5 ± 0.5mm
● If the fuel level is not within the specification, adjust
the fuel level;
● Remove carburetor
● Check valve seat and needle valve
● If either of valve seat or needle valve is worn,
replace both;
● If both are fine, adjust float height by bending the
float tang
①
on the float;
● Install carburetor
● Check again the fuel level
Carburetor Assembly
Reverse the disassembly procedure for assembly
7