XY Powersports XY500UTV, Руководство по обслуживанию

Страница: 132 / 259

6. ENGINE REMOVAL; INSPECTION & INSTALLATION
6-47
●
Check starter clutch roller and holder for abnormal
wear or damage.
Wear or damage:
→
Replace
●
Install the starter clutch in the correct direction.
●
Face arrow mark “B” to the engine side;
●
Apply engine oil to starter clutch.
●
Apply thread locker to bolt and tighten to the
specified torque:
Tightening torque of starter clutch bolt: 26N.m
Material: Thread Locker
●
Install the starter driven gear
●
Make that the starter driven gear turns in the
opposite direction of the arrow mark “B”. The gear
cannot turn in the direction of the arrow.
●
Check starter driven gear bearing. In case of
anything unusual, replace the bearing.
●
Remove starter driven gear bearing with special tool
●
Install starter driven gear bearing with special tool.
Tool: Bearing Installer/Remover
Note:
When install the starter clutch to the magneto
rotor, make sure side “A” is in the right direction.
6