XY Powersports XY500UTV, Руководство по обслуживанию

Страница: 138 / 259

6. ENGINE REMOVAL; INSPECTION & INSTALLATION
6-53
● Install new O-ring and apply grease;
● Install gear sensor;
● Install reverse gear sensor 9 and tighten to the
specified torque.
● Reverse gear sensor tightening torque: 20N.m
● Install speed sensor 24
● Install oil pipe and tighten the link bolt to the
specified torque;
Link bolt tightening torque: 18M.m
● Install washer 26 and oil drainage bolt 27 and
tighten to the specified torque;
Drain bolt tightening torque: 30N.m
Tool: Bearing Remover
Bearing Installer
Multimeter
III Engine Assembly
Reverse the engine removal procedure for installation.
Engine Center
Oil Pump and Relief Valve
● Install oil pump and relief valve to left crankcase, as
illustrated on the right. Tighten to the specified
torque:
Oil pump bolt: 10N.m
Relief valve bolt: 10N.m
Caution:
● Clean all the parts before assembly;
● Make sure that the parts are in good condition
without any damage;
● Apply engine oil to the moving parts before
assembly;
● Apply grease to oil seal lip and O-ring
Caution:
Make sure that drive belt, primary and secondary
sheaves are not stained with grease.
6