XVision XSD10Z-2, Руководство пользователя

Страница: 18 / 24

18
7.5.2 Edit Preset Label
In the Edit Label menu use the Left/Right/Up/Down of the joystick to move to the desired character from the Character set.
- To choose the character, press the NEAR key
- If you want to use blank, choose Space character (as shown in the diagram above)
- If you want to delete a previous character, use the back space character ( )
- If you complete the Label editing, move cursor to ‘OK’ and press the NEAR key to save the completed label.
- To cancel any changes, move the cursor to ‘Cancel’ and press the NEAR key.
7.6 SWING SETUP
Swing Number: [1~8]
Selects Swing number to edit. If a selected Swing has not been defined, ‘NOT USED’ will display in 1st Position and 2nd Position
1st Position: [PRESET 1~128]
2nd Position [PRESET 1~128]
Set up the 2ND position for Swing function If a selected preset is not defined, ‘UNDEFINED’ will be displayed as shown below:
When swing function runs, the camera will move from the preset assigned as position 1 to the preset assigned as position 2 in a
CW (Clockwise) direction. Then the camera will move from position 2 to position 1 in a CCW (Counterclockwise) direction.
If the preset assigned as the 1st point is the same as the preset assigned as the 2nd point, the will turn on its axis by 360 in a CW
direction and then it turns on its axis by 360 in a CCW direction
Swing Speed [1 /sec~180 /sec]
Sets Swing speed from I /sec to 180 /sec.
Clear Swing [CANCEL/OK]
Deletes current Swing data
EDIT PRESET LABEL
[_ _ _ _ _ _ _ _ _ _]
1 2 3 4 5 6 7 8 9 0 OK
A B C D E F G H I J CANCEL
K L M N O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o q r s t u v w x
y z < > - / : .
Space character
Current Cursor position
SWING SETUP
SWINGING 1
1ST POS NOT USED
2ND POS NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
BACK
EXIT
SWING SETUP
SWINGING 1
1ST POS PRESET5
2ND POS NOT USED
UNDEFINED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
BACK
EXIT