XVision XSD10Z-2, Руководство пользователя

Страница: 16 / 24

16
7.4.1 Parking Action Setup
z Park Enabled [ON/OFF]
If Park Enable is set to ON, the camera will run the assigned PTZ function automatically if there is no ‘’Wait Time’’ assigned
z
Wait Time
[1 minute-4 hours]
The time is displayed in HH:MM:SS” format and you can change this by 1 min units.
z
Park Action [HOME/PRESET/PATTERN/SWING/GROUP]
- Home: Camera moves to home position if there is no PTZ command during assigned in “Wait Time”.
7.4.2 Alarm Input Setup
Match the Alarm sensor input to one of Preset positions. If an external sensor is activated, the camera will move to corresponding
predefined preset position.
z
Alarm Type [ Normal OPEN/Normal CLOSE]
Sets sensor input type.
z
Alarm Action [NOT USED/PRESET 1~128]
Assign counteraction Preset position to each Alarm input.
PARKING ACTION SETUP
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
ALARM INPUT SETUP
ALARM1TYPE N.OPEN
ALARM2TYPE N.OPEN
ALARM3TYPE N.OPEN
ALARM4TYPE N.OPEN
ALARM1ACT NOT USED
ALARM2ACT NOT USED
ALARM3ACT NOT USED
ALARM4ACT NOT USED
BACK
EXIT