XVision XSD10Z-2, Руководство пользователя

Страница: 15 / 24

15
z
Backlight [ON/OFF]
Sets Bacldight Compensation
z
Day/Night [AUTO1/AUT02DAY/NIGHT]
AUT01 exchanges Day/Night mode faster than AUT02.
z
Brightness [0-100]
Adjusts brightness of images. Iris, Shutter Speed and Gain are adjusted automatically in correspondence with this value
z Iris [AUTO/MANUAL(0~100)]
if Iris is set to Auto Iris should have highest priority in adjusting AE and Shutter Speed should be fixed. If Iris is set to Manual,
Iris should be fixed aa Iris has lower priority in adjusting AE.
z Shutter Speed [ESC/A. Flicker/Manual(x128~1/120000 sec )]
If Iris is set to Manual and Shutter Speed is set to ESC,Shutter Speed should have highest priority. If Shutter Speed is set to A.
Flicker, to remove Flicker, Shutter Speed should be set to 1/100 for NTSC and 1/120 for PAL.
z AGC [OFF/NORMAL/HIGH]
Enhances image brightness automatically if the luminance level of image signal is too low
z
SSNR (DNR - Digital Noise Reduction)
[OFF/LOW/MIDDLE/HIGH]
Enhances images by deducting noises when gain level of images is too high.
z
SENS-UP (Dynamic Night View) [AUTO(2-128)/OFF]
Activates Slow Shutter function when luminance of Image is too dark. It is possible to set up the maximum number of frames
piled up one on another by Slow Shutter function.
7.4 MOTION SETUP
Use this menu to setup the general functions of zoom camera module.
Motion Lock: [ON/OFF]
If Motion Lock is set to ON, it is impossible to set up and delete Preset, Swing, Pattern and Group. Otherwise it is only possible to
run those functions.
Power Up Action: [ON/OFF]
Refer to “Other Functions” section.
Auto Flip: [ON/OFF]
Refer to “Other Functions” section.
Jog Max Speed: [1/sec - 360/sec]
Sets maximum jog speed. Jog speed is inversely proportional to zoom magnification. As zoom magnification goes up, pan/tilt
speed goes down
Jog Direction:
[INVERSE/NORMAL]
If you set this to ‘Inverse’ the view in the screen will move in the same direction with jog tilting. If ‘Normal’ is selected, the view
in the screen will move reversely
Freeze in Preset: [ON/OFF]
If set to ON, at the start point of preset movement the camera freezes the image of start point and keeps displaying the image
during the entire preset movement. It does not display the images which the camera gets during the preset movement. As soon
as camera stops at preset end point, camera starts displaying live images which it gets at preset end point.
AE SETUP - GLOBAL
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT