10
6.5 PATTERN
The Pattern Function allows the camera to follow a user defined trajectory set by a joystick or controller for an assigned time
path. 4 Patterns are available and a maximum of 1200 communication commands can be stored per pattern.
z
Set Pattern
Pattern can be created by following the steps below:
- Enter OSD Menu > Pattern Setup
- Pattern editing screen is displayed as below.
- Move the Joystick and preset movement will be memorised in a pattern.
- The rest memory size is displayed in progress bar.
- To save the recording, press NEAR key and to cancel, press FAR key
z
Run Preset
Run Pattern 1: <Go Preset>[131]
Run Pattern 2: <Go Preset>[132]
Run Pattern 3: <Go Preset>[133]
Run Pattern 4: <Go Preset>[134]
Delete Preset
To delete Pattern, use OSD menu.
6.6 GROUP
The group function allows the running sequence of Presets, Pattern and/or Swings. A maximum of 8 groups can be stored. Each
group can have a maximum of 20 action entities which can be preset, pattern or swing. Preset speed, the repeat number of
Pattern/Swing and dwell times between actions can be set up in Group setup.
z
Set Preset
To set a Group, use the OSD menu
z
Run Preset
Run Group 1: <Go Preset>[151]
Run Group 2: <Go Preset>[152]
Run Group 3: <Go Preset>[153]
Run Group 4: <Go Preset>[154]
z
Delete Preset To delete Group, use OSD menu.
Preset 1
Preset 2
Swing 1
Maximum of 20
Dwell Time
EDIT PATTERN
[NEAR:SAVE FAR:DELETE]
0/0/×1/N
Содержание XSD10Z-2
Страница 23: ...23 ...
