XtendLan Hybrid NDVR system, Руководство пользователя

Страница: 83 / 126

【
Image
】
Set the quality of the image to be recorded. Select from worst,
worse, normal, good and best.
【
Bit Rate Type
】
Select bit rate type from Variable Bit Rate (VBR) and
Fixed Bit Rate (FBR) record:
VBR range= Poorest, Poor, Medium, Good, Best.
FBR range = 45 Megabytes/Hour to 400 Megabytes/Hour.
【
Max Bit Rate
】
Select the maximum bit rate for Variable Bit Rate (VBR)
record.
【
Show LOGO/ OSD/ Week
】
If you check those boxes, system will show
corresponding information on screen.
【
Position
】
Set the position of OSD or Logo by entering the X and Y
coordinate directly.
【
OSD
】
Set the display attribute of the OSD & LOGO. There are four
types of display modes: Clarity-Glitter, Clarity-Not Glitter, Not Clarity-Glitter and
Not Clarity-Not Glitter.
【
OSD Type
】
Select the type of OSD for the Week.
【
Privacy Mask
】
You can check this box to set the privacy mask on the
below image directly, and you can clear some privacy masks by pressing
button.
【
Record schedule
】
You can set record schedule in following chart.
Note:
This record schedule is only available to EM-DVR. There are 4 time
segments every day. Every segment has a start time, an end time and a record
type. The time segment is set in sequ
ence; every segment can’t be overlapped,
included or skipped with any other.
【
Copy to
】
After finishing one channel, if you want to set any other
channels’ configuration as the same as this camera, you can select channel
number from drop-list, and press button.
, Set the time to post or pre the record.