XtendLan Hybrid NDVR system, Руководство пользователя

Страница: 74 / 126

Here you can select to output 1/4 split mode, then select to display
camera in corresponding output window. Tour function is supported. Other
related operation is similar to the Matrix settings for DG42xxHF cards.
New version software supports the VGA output for DG42xxHF cards, the
settings are samilar to the Matrix settings. If you find there is frame loss for
recording while doing VGA output, please adjust the resolution/image
quality/frame rate properly.
2.6.4 Display Setup
【
Pre-setup Display Group
】
System operator can set groups of cameras
to be displayed for fast preview, including its display mode and cameras. Up to
16 groups can be set.
【
Software Start Display Group
】
Select to display the default order or
the order you set in one group. You can select any group you set from the drop
down list. After the settings, the system will display the group you selected
when restart the next time.
Note:
If this function is disabled, the system will display SetGroup1 after reboot.
So, it
’s suggested not to change the display order of SetGroup1. User should
change the display order from SetGroup2.
【
Video View Mode
】
Set the split mode, the split mode is same as main
window’s display split mode. There are1, 4,9,13,16,20,25,28,33,36,40,49 and