XtendLan Hybrid NDVR system, Руководство пользователя

Страница: 65 / 126

【
PTZ Baud rate
】
Select PTZ Baud rate for the PTZ camera.
【
PTZ Position
】
Select the installation mode of the PTZ according to its
installation mode.
Note:
1) PTZ position will influence PTZ control. E.g.: if you set it as obverse
and press left, then it will turn left. If you set it as inverse and press left,
then it will turn right;
2) If there is (H) after the PTZ protocol, it has the high speed of Preset
function. If there is no (H), it only has ordinary functions;
3) The PTZ address will be sent as a message option. Take care that
some addresses begin from 0. That is to say
，
when the address
number is 1, the real address is 0. So we must set it according to their
relations.
2.4.2 Motion Detection Relay
【
DO Port
】 【
DO Port Name
】
Select a DO port and set its name to identify
the various DO port. It will be shown as a tip when the mouse moves closely or
above the DO button in Hybrid NDVR Server or CMS Client.
【
Camera Alarm Detected in
】
Selects camera to be set from dropdown
list.
【
Alarm Write Log
】
Select write alarm log or not when there is an alarm
triggered. You can set the interval to write log as 5s, 10s, 30s, 1min, 2min or
3min to enable writing log when there is alarm triggered.
【
Send Alarm to Client
】
Select sending alarm to network clients or not.
【
Motion Alarm Sound
】
Press button to selects
a “.wav” sound File
for a motion alarm. If there is a motion alarm, the sound file will be played. Also,
you can test it by pressing button.
【
Video Loss Alarm Sound
】
Press button to selects
a “.wav” sound
File for a video loss alarm. If there is a video loss alarm, the sound file will be
played. Also, you can test it by pressing button.
【
Motion Send Email
】
Set sending Email disable or enable when there is
mtion alarm triggered. You can set the interval to send an email as 5s, 10s, 30s,
1min, 2min or 3min to enable sending email.