XtendLan Hybrid NDVR system, Руководство пользователя

Страница: 41 / 126

be cleared from the list.
Select one device from the list and click button to add it to
the Hybrid NDVR system.
When you finished adding IP Camera to Hybrid NDVR system, it will show
the status of that camera, including Sever name, IP Address, connect port,
sequence number for IP Camera, connect status and register information.
Note:
After you add IP cameras to Hybrid NDVR system, they will be collocated
sequence numbers after local board cards. The sequence numbers of the IP
cameras change dynamically according to the total numbers of local board
cards and the sequences of the IP cameras that have been added to Hybrid
NDVR system. For example, if there are 32 channels local board cards, then
you add 2 IP cameras. They will be collocated 33 and 34 as their sequence
numbers. Then if you add another board card (4 channels), the sequence
numbers of them will change to 37 and 38 dynamically.
(2). Modify IP camera
Press button to modify IP camera
’s information, its interface is
same as Add IP Camera.
(3). Delete IP camera device
Press button to delete connected server. When system is in
processing to add IP camera device (
“connecting…”indicated in connect status
column), user cannot delete that IP camera device.
(4). Decode card work mode
Hybrid NDVR system supports playing video of IP Camera to TV wall
directly, and then it uses the hard decoding function of decoder, so you should
set the work mode of decoder. If you
don’t use hard decoding, you can’t output
video of IP Camera real-time, user can only play back recording data to TV
monitor by selecting Playback to TV Monitor function.
Note:
Each NV4002MD card can decode 2 channels D1 or 4channels CIF.
Each NV4004MD card can decode 4 channels D1 or 8 channels CIF.
When you select the work mode, system will send out corresponding
channels of IP camera from the first IP camera. It will not influence soft
decoding for cameras of local board cards. If you enable hard decoding, then
all the images of cameras will be displayed in overlay model, adversely, all the
images of cameras will be displayed in off screen model.