We’re committed to bringing you the best in video entertainment every day. Your replacement
Genie
®
Mini is enclosed. Here’s how to connect and activate it, plus how to return your non-working
equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1
CONNECT YOUR REPLACEMENT GENIE MINI
·
Carefully stack your replacement Genie Mini on top of your non-working Genie Mini.
·
Transfer one connection at a time from the non-working Genie Mini to the replacement
Genie Mini, except for the power cord. Need help? Go to
·
Plug the power cord into the replacement Genie Mini, then into a power outlet. If the receiver
doesn’t automatically power up, press the POWER button.
·
Turn on your TV.
2
RESET YOUR REMOTE
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3
SETUP
·
Select REPLACE A LOCATION, choose the Client you want to remove and select REPLACE.
·
Select YES, REPLACE to confirm your choice.
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
1
Connect
2
Reset
3
Setup
4
Activate
5
Program
6
Return
Genie Mini with Genie Mini 2
Q
ACTIVATION & EQUIPMENT
RETURN INSTRUCTIONS
(Continued on back)
Replace a Location
Select whether you would like to add a new location or replace an
existing location.
Create a New Location
Add a New Location
Replace a Location
Instructions can be found online at
or
by scanning the QR code.
Remote
Reset
2
10-pin single
end connects
to the receiver
HDMI
HDMI
Black component
cables are for video
Gray component
cables are for audio
Colored cable ends
connect to the TV
1
NETWORK
DOLBY
DIGITAL
IMAX
Genie Mini
3
