It will pop up to tell you no recording data was found and ask you to
change the play time when there is no record data to the selected camera.
Button Description
Play, Pause, Stop
Next Frame
Play Speed Control: Drag the slider bar to the left to slow
down or to the right to speed up.
Grab Picture: The captured pictures will be saved in the same path as
you set in system setup.
Save Record Data: Press this button to begin to save record data and
press it again to end.
5.
Start Alarm Pop up
Single-Right-Click video image area in main interface and select
“Start
alarm popup” after you set “Alarm camera popup interval” in
System Setup
,
otherwise, it can’t be selected with gray. After that when there is a motion
detection alarm (set in
PTZ & Linkage Setup
and
Motion Detection Setup
) or
an alarm triggered by sensor (set in
Sensor Setup
), system will display alarm
cameras in sequence. When you want to end this function, you can
Single-Right-Click video image area and select
“Pause alarm popup”.
Содержание Hybrid NDVR system
Страница 1: ...Hybrid NDVR system USER S GUIDE...
