177
using SMTP
This is the most simple approach which works with almost all mail servers. For
each inbound mail SX-GATE opens an SMTP connection to the internal mail
server and The received sender and recipient addresses are forwarded to it.
Depending on the replies of the internal mail server, the sender is then either
allowed to continue with the transmission of the email or the mail is rejected.
With this method you can even make use of any capability
your internal mail server offers to reject sender addresses.
Make sure that the internal mail server immediately rejects
unknown recipient addresses. In Microsoft Exchange you
might have to enable recipient filtering. Since Exchange
2013 this requires an additional HubTransport connector
in Exchange, scoped for SX-GATE's IP and granting
anonymous access.
using LDAP (Active Directory)
The requested recipient addresses will be looked up in an Active Directory
(attribute "proxyAddresses"). The necessary parameters for LDAP access have
to be configured in menu "System > User administration > Settings".
Verify recipient addresses in advance
-
disabled
Please read on at
(p. 178)
-
using SMTP
Please read on at
Verify recipients using SMTP callout
(p. 177)
-
using LDAP (Active Directory)
Please read on at
(p. 178)
Verify recipients using SMTP callout
SMTP port for verification
Address verification can use a different port than the actual mail delivery.
Please read on at
Содержание SX-GATE
Страница 1: ...State 2016 12 13 V7 0 2 0 User Guide ...
Страница 92: ...12 1 Setup 92 There s no way to restore a purchased certificate without backup ...
Страница 126: ...12 3 3 Groups 126 12 3 3 C Usage This table show in which settings the definition is used ...
Страница 476: ...15 3 Apple iPhone 476 ...