155
SX-GATE DHCP server
Activate DHCP server
The SX-GATE DHCP service can centrally control and automate the IP address
allocation and the IP configuration of the workstations in your local network. SX-GATE
can carry out this function in your LAN if the DHCP service is not already offered by
another server.
If a DHCP server already exists in your LAN, the SX-GATE DHCP server can be
configured as a secondary DHCP server. In this way the DHCP service is still available
in your local network even when the primary DHCP server is offline.
Activate DHCP server
-
yes
Please read on at
(p. 155)
-
no
Please read on at
(p. 156)
Backup DHCP server
Use SX-GATE as a secondary DHCP server
Activate this option if you want to use SX-GATE as secondary DHCP-server.
If you unnecessarily configure the DHCP server as a secondary,
the start up time or workstations will be longer. If more than one
primary DHCP servers is active, the server that replies faster will
assign the IP configuration. Depending on the behaviour of the
servers, disruptions or interferences may occur.
In contrast to a primary DHCP server, SX-GATE as secondary will not reply immediately
when a device asks for an IP address. SX-GATE will only reply when a few seconds
have passed and the device continues to demand the IP address. In this case SX-
GATE assumes that the primary DHCP server is not available and will thus assign an
IP address.
Please make sure that the IP address ranges assigned by the
primary and the secondary DHCP servers do not overlap. As
the primary server is not aware of the existence of a secondary,
overlapping may result in a conflict.
Содержание SX-GATE
Страница 1: ...State 2016 12 13 V7 0 2 0 User Guide ...
Страница 92: ...12 1 Setup 92 There s no way to restore a purchased certificate without backup ...
Страница 126: ...12 3 3 Groups 126 12 3 3 C Usage This table show in which settings the definition is used ...
Страница 476: ...15 3 Apple iPhone 476 ...