Xinje XP3-BD series, Руководство по оборудованию

Страница: 17 / 30

XP3-BD User Manual Page 17 of 30 MANUL008R2V1
This BD expansion does not use I/O unit, the converted data is directly sent into PLC register,
also add two extra output points. Extra outputs do not include normal system’s I/O output.
Channels correspond to the PLC register ID:
Channel Current
Temperature Set
Temperature Kp Ki Kd Diff Start/stop
0CH ID1000 QD1000 QD1
001 QD1
002 QD1
003 QD1
004 Y1000
1CH ID1001 QD1005 QD1
006 QD1
007 QD1
008 QD1
009 Y1001
Note:
1. Kp: proportion parameter, Ki: integral parameter, Kd: differential parameter; Diff: control
proportion band.
2.
Control coil’s status (Y1000/Y1001): 0 = means close PID control, 1 = means start PID
control.
3.
Expansion’s input has voltage 0/5V or 0/10V these two modes and filter form to select. Set
via set the 4 channels’ mode, each register has 16 bits. From low bit to high bit, each 4 bits set
one channel’s mode
3-4 Assign input/output ID