Xinje XP3-BD series, Руководство по оборудованию

Страница: 8 / 30

XP3-BD User Manual Page 8 of 30 MANUL008R2V1
This BD board does not use standard I/O units memory addresses, the converted data will be
directly sent into PLC register. The channels correspond to the PLC register ID:
Channel 0CH 1CH 2CH 3CH
AD signal/Temperature
value ID1000 ID1001 ID1002 ID1003
PID output value ID1004 ID1005 ID1006 ID1007
Set the target value QD1000 QD1001 QD1002 QD1003
Kp QD1004 QD1009
Ki QD1005 QD1010
Kd QD1006 QD1011
Diff QD1007 QD1012
Dead Band
QD1008 -
Start/Stop
Y1000 Y1001 Y1002 Y1003
Note:
1. PID value: PID output value:0 to 4095.
2. Kp: proportion parameter
3. Ki: Integral parameter.
4. Kd: Differential parameter.
5. Diff: Control proportion band.
6.
Control coil’s status:
Y1000/Y1001 (0 = means stop PID control, 1 = means run PID control
Description:

0CH and 1CH are AD input channels.

2CH and 3CH are PT100 input channels.

Kp: proportion parameter.

Ki: Integral parameter.

Kd: Differential parameter.

Diff: Control band.

Control Band Diff
: Carry on PID control in the assigned band, beyond the band, don’t carry

on PID control

Start Signal (Y): PID control is closed when Y is 0, open PID control when Y is 1.

Dead Band “Dead Band”: Compare the current PID output value with the preceding PID

output value. If their difference is less than the set Dead Band, the module will abandon the

current PID output value; still transferring the preceding PID output value to PLC main unit.
2-4 Assignment of input ID