Xiaguang XP XG2045 Скачать руководство пользователя страница 6

Страница: 6 / 71

ADSL2+ Tester 1 Overview

72-0046-03A 6

Handheld structure, durable design, suitable for carrying around and on-spot

measurements

Embedded with Broadcom chipset, good compatibility

Comply with multi-standards:

ITU-T G.992.1 (G.DMT), ITU-T G.992.2 (G.lite), ITU-T

G.992.3 (ADSL2), RE-ADSL, ITU-T G.992.4 (Splitterless ADSL2), ITU-T G.992.5
(ADSL2+), ITU-T G.992 Annex A, Annex B, Annex C (FBM and DBM), ANSI T1.413
Issue 2, YDN078-1998

Support multi-protocols: PPP over ATM (PPPoA), PPP over Ethernet (PPPoE),

RFC-1483 Bridge (BRIDGE), IP over Ethernet over ATM (MER), IP over ATM (IPoA)

Easily confirm the successful delivery of ADSL services at the customer premise or

anywhere along the local loop

Support both WAN PING and LAN PING

Support replacing modem and simulating the whole process of login on internet.

Real-time display upstream and downstream bit rate and throughput.

Attached clamp cable, LAN test cable (direct and intercross) can be conveniently

connected to the telephone twist wires and Ethernet card of PC.

Built-in NiMH rechargeable batteries and embedded with smart fast charger circuit.

Can be charged with automobile cigarette lighter battery adapter.

Field replaceable and rechargeable NiMH battery module.

Beep and LEDs alarm and status indicators indications.

High storages capacity, can store up to 10 groups of test settings including and 50

groups of test results information.

Auto-shut function

Real-time clock and storages could be kept during a long time by power supply of the

second spare battery without AC adapter and built-in NiMH battery module.

By using TestManagerPro software, upgrading the embedded software of the tester

via the serial port to perfect the functionalities and protect your investment.

1.5

Product Composition

ADSL2+ Tester is consists of below modules:

Hardware: Mainboard, Power board, Display board.

Software: Embedded software and PC software--TestManagerPro.

Accessories: Waterproof package, Test cables, AC power adapter, Rechargeable

batteries, Automobile cigarette lighter battery adapter cable, and etc.

1.5.1

Appearance and accessories of the tester

Содержание XG2045








































































Результаты поиска

Содержание XG2045

Отзывы:

Похожие инструкции для XG2045

Бренды по названию

Популярные бренды

Xiaguang XP XG2045, Руководство пользователя

Результаты поиска

Содержание XG2045

Отзывы:

Похожие инструкции для XG2045

Бренды по названию

Популярные бренды