A u t o m a t i c I n s t a l l a t i o n P r o c e d u r e
5-10
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
5
Enter the commands:
c d
x r x
. / e n s t a l l - s
6
Read and follow the instructions on the screen.
7
When you are asked to enter the device full path and file
specification of your distribution medium, type the name of
your floppy drive.
For example:
/dev/fd0, /dev/rdiskette
8
When you are asked to which LAN Hardware Interface the
Xerox servers will be connected, enter your Ethernet or
Token Ring device name.
For example:
le0, tr0, hm0
9
If your XNIC has not been assigned an IP address, enter a
new IP address when asked to do so.
10
When asked to enter the printer model, refer to Table 5.1 to
find the correct value.
11
After completing the installation of a print queue on your
host spooling system, the XNIC is ready for use on the UNIX
TCP/IP network.
12
If necessary, you can now install the Xerox printer driver
supplied with your printer.
13
If necessary, repeat this procedure for each UNIX system that
requires access to the printer.
Etr-ch05 Page 10 Thursday, October 24, 1996 7:31 PM
