U N I X T C P / I P P r o b l e m s
C h a p t e r 1 1 : T r o u b l e s h o o t i n g
❖
11-15
Check the error log(s) in the
/tmp
directory for possible
problems. If errors are not reported or if the error log
does not exist, verify the printer status using the
lpc
(BSD) or
lpstat -t
commands (System V).
Examine the
/etc/printcap
file for the
xrx_text
entry
and change
disable
to
enable
.
Log into the XNIC and verify that the print definitions are
enabled for the protocol you are using. Also verify that
the service you are trying to use is authorized for the
desired protocol. Authorized protocols for the server are
displayed using the
SHOW SERVER NETWORK
command. These commands are discussed in the section
Basic XNIC Commands
(page 5-37).
If you experience difficulties locating the problem on
TCP/IP networks, use the
Log File
or
Trace Mode
options.
ETR-CH11 Page 15 Thursday, October 24, 1996 7:14 AM
