Xerox WorkCentre 6400S, Руководство системного администратора

Страница: 27 / 184

Network Configuration
WorkCentre 6400 Multifunction Printer
System Administrator Guide
27
SLP
Devices use Service Location Protocol (SLP) to announce and look up services on a local network. If you
enable SLP on the printer, it becomes a Service Agent (SA) and announces its services on the network
to User Agents (UA), who search for services, using the protocol.
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
1. In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
SLP
.
2. If available, type an
IP address
for the
Directory Agent (DA)
.
Note: Directory Agents (DA) are devices that cache services. They are used in larger networks to
reduce the amount of traffic. DAs are optional, however if a DA is present, then UAs and SAs are
required to use it instead of communicating directly with the device.
3. Type the names for
Scope 1
,
2
, and
3
. Scopes are used to group services. Devices cannot see
services that are in different scopes. The default value for Scope 1 is DEFAULT .
4. Select Multicast or Broadcast from the Message Type drop-down menu.
5. Type a value for Multicast Radius between 1 and 255. The default is 255.
6. Type a value for the Maximum Transmission Unit (MTU) between 484 and 32768. The default
setting is 1400 bytes. MTU determines maximum packet size allowed to be transmitted for SLP.
Note: The maximum MTU for IP over Ethernet is 1500 bytes.
7. Click
Apply
.
8. Click
OK
.