![background image](http://html1.mh-extra.com/html/xerox/phaser-790dp/phaser-790dp_getting-started-manual_3912476019.webp)
Installing the 2 Tray Module
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-9
Installing the 2 Tray Module (optional)
If you ordered the 2 Tray Module, perform the following steps. If you did not
order the 2 Tray Module, go to the
Unpacking the Printer
procedure.
WARNING
You will need at least two people to remove it from the carton.
1.
Open the 2 Tray Module carton.
2.
Remove the styrofoam and the plastic wrap from the top of the 2 Tray
Module.
3.
With a person on each side of the box, grasp the crossbars in the
locations indicated by the labels.
301098a
4.
Lift the 2 Tray Module from the box and place it the selected location.
5.
Lock the front casters as shown below.
301007B-WOL
0
Содержание Phaser 790DP
