![background image](http://html1.mh-extra.com/html/xerox/phaser-790dp/phaser-790dp_getting-started-manual_3912476071.webp)
Xerox Phaser 790 Getting Started
3-1
Network Setup
This is formation in this chapter is for the
customer only
.
If you want to install the Print Drivers on their user workstation please go
to the appropriate procedure in this chapter:
•
Windows 95/98
•
Windows 2000
•
Windows NT 4.0
•
Macintosh OS 5.0
Installing the Token Ring Network card
The Token Ring Network Kit is required when setting up a closed loop, or
Local Area Network (LAN). Token Ring Networks can be connected to other
networks, in local and remote locations.
You will need a phillips screwdriver in order to perform this procedure.
CAUTION
•
Protect the network card from static electricity by keeping it in the
antistatic bag until you are ready to install it.
•
Handle the card by the top or side edges only. Do not touch the card
components or the brass connector edge.
•
Avoid placing the card near magnetic devices, such as a PC monitor.
•
Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1.
Switch OFF the power to the Printer.
2.
Disconnect the power cord from the rear of the Printer.
3
Содержание Phaser 790DP
