Xerox Phaser 6500 Скачать руководство пользователя страница 47

Страница: 47 / 793

Phaser 6500/WorkCentre 6505 Service Manual

Xerox Internal Use Only

1-23

General Information

Operating Mode

Mode

Condition

Description

Running Mode

There are three running modes:

■

Print mode

– the print engine operates

for printing and report printing in the

SFP, and for printing, copying, Fax

received printing, and report printing in

the MFP.

■

Scan mode

(MFP only) – the IIT is

operating for copy, local, and network

scanning, and for Fax sending.

■

Fax communication mode

(MFP only) –

Fax sending/receiving is in progress.

Exposure

The Laser Unit Motor runs at the
operating speed.

Recording

The system is operating.

Fusing

Maintained at operating temperature.

IIT

Scanner or ADF is in operation, scanning
lamp is on.

Cooling Fan

The fan operates at high speed.

Control Panel
Operation

LCD - Backlight: On
LED - Ready LED is On.

Ready Mode

The printer is in standby status, ready to
run.

Exposure

The system is at Pause.

Recording

The system is at Pause.

Fusing

The system keeps the standby
temperature.

IIT

The Scanner and ADF are in a standby
status, ready to run.

Cooling Fan

The fan operates at low speed.

Control Panel
Operation

LCD - Backlight: On
LED: If printer is online, Ready LED is On.

Power Saver
Mode (Deep
Sleep)

The printer enters Power Saver mode
when it has not received print data for the
specified time.

Exposure

The system is at Pause.

Содержание Phaser 6500

























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Phaser 6500

Отзывы:

Бренды по названию

Популярные бренды

Xerox Phaser 6500, Руководство по обслуживанию

Результаты поиска

Содержание Phaser 6500

Отзывы:

Бренды по названию

Популярные бренды