Phaser® 6250 Color Laser Printer
Copyright © 2003 Xerox Corporation. All Rights Reserved.
2-32
Transparencies
This topic includes:
■
"Guidelines" on page 2-32
■
"Printing Transparencies from Tray 1 (MPT)" on page 2-33
■
"Printing Transparencies from Tray 2" on page 2-34
Transparencies can be printed from Tray 1 (MPT) or Tray 2. Handle transparencies by the
edges using both hands to avoid fingerprints and creases which can cause poor print quality.
Guidelines
■
Xerox recommends that you use only Xerox Phaser 25-Series Premium Transparency
Film, which has been specifically developed for use with this type of printer fuser.
■
Place no more than 50 transparencies at one time in the tray.
To order supplies and accessories, contact your local reseller or visit the Xerox web site at
www.xerox.com/officeprinting/6250supplies
.
Caution
Non-Phaser 25-Series Premium Transparency Film can produce poor image quality, jam
the printer, wrap around the fuser rollers, or melt. Some non-Phaser Series-25 Premium
Transparency Film have paper tape on the edge that can separate in the heat of the fuser,
leading to damage. Damage caused by using non-Phaser 25-Series Premium Transparency
Film is not covered under the Xerox warranty, service agreement, or Total Satisfaction
Guarantee.
Videos are available with instructions for loading transparencies. Videos are
located on the
User Documentation CD-ROM
and at
www.xerox.com/
officeprinting/6250support.
