Phaser® 6250 Color Laser Printer
A-4
Moving the Printer
The printer is heavy and must be lifted by two people. The illustration below demonstrates the
proper technique for lifting the printer.
Follow the recommended procedure when moving the printer from one location to another.
Information about moving your printer is included in the repackaging kit. You can order the kit
from
www.xerox.com/officeprinting/6250supplies
or contact your local Xerox service
representative. For additional instructions about repackaging the printer go to
Setup/Other
Resources/Instruction Sheets
on the User Documentation CD-ROM.
■
Always use two people to lift the printer.
■
Always turn off the printer using the power switch and unplug all cables and cords.
■
Always lift the printer from the designated lift points.
■
Do not place any food or liquids on the printer.
■
Failure to repackage the printer properly for shipment can result in damage to the printer
not covered by the warranty, service agreement, or Total Satisfaction Guarantee.
■
Damage to the printer caused by improper moving is not covered by the Xerox warranty,
service agreement, or Total Satisfaction Guarantee.
Warning
Avoid touching areas inside the printer that are labeled with a warning symbol. These
areas may be very hot and can cause personal injury.
Printing Safety Guidelines
■
Wait 10-15 seconds between turning the printer off and on.
■
Keep hands, hair, neckties, etc., away from the exit and feed rollers.
■
Do not remove the paper source tray that you selected in either the printer driver or front
panel.
■
Do not open the doors.
■
Do not move the printer.
37 kg
80 lbs.
6250-070
